How to make a simple Battery

What you will need:

1. A 600ml plastic bottle
2. A piece of hose, stem or other form of tube
3. A Lighter
4. A cone piece or some foil or an aluminium can

Step One:
Lightly burn the 600ml about 1/3 of the way up, When it is beginning to melt, jam your hose, stem or tube into the melting area so that the other side of the hose goes straight to the bottom of the bottle

Step Two:
Then melt another smaller hole on the other side of the bottle about half way up. This will be your shotty.

Step Three:
Now simply insert your cone piece into the hose (melt the hose around the cone piece if necessary) and you're done and ready to smoke!Note that you can make a cone piece out of aluminium foil or an aluminium can by simply cutting it, modelling it on the end of a pen and once you have the cone shape you are after, insert it into your stem!